4 module specifications – Yaskawa MP2000 Series User Manual
Page 9

Page 9
MP2000.02, 1/18/2011
Data subject to change without notice
Yaskawa America, Inc.
1.4 Module
Specifications
The function specifications of the PCLINK-01 module are shown below.
1.4.1 Hardware
Specifications
Item Specification
Name MP2300/PCLINK-01
Model JAPMC-CM2380
Communication Port
PCLINK 1 Port
RS-232C 1 Port
Indicators
Module Status Indicator LEDs
RUN (Green) ERR (Red) LTX (Green) STX (Green) LRX (Green) SRX
(Green)
Setting Switch
BRS0, BRS1, SBRS, HOLD, INIT, TEST
Dimensions
Height: 125 mm (4.9 in.) Depth: 95 mm (3.7 in.)
Approximate Mass
130 g (11.8 oz)
1.4.2 Transmission Specifications
RS-232C Transmission Specifications
Item Specification
Connector D-sub
9-pin
(Female)
Transmission Distance
15 m (49.2 ft) MAX
Baud Rate
9600/19200bps
Access Mode
Asynchronous Type (Start-Stop Synchronization)
Transmission Mode
Message Transmission, Engineering Transmission
Transmission Protocol
MEMOBUS Communication
Connection State
1:1
Transmission Format
(Settable)
Data Bit Length: Fixed at 8 bits
Stop Bit: Fixed at 1 bit
Parity Bit: Fixed at even number
PCLINK Transmission Specifications
Item Specification
No. of Communication Lines
1 Line
No. of Communication Ports
(connectors)
1 Port (BNC Connectors)
(A T-type mounting adapter and F-type adapter are necessary during cable
connection)
Terminal Resistor
75
Transmission Path
Coax
ÁÂÃÄÅÂÆÃÇÄÈÉ
Transmission Distance
Total Extension (conditional) equal to GL120/PCLINK (see SIZ-C825-70.)
At 4Mbps: Approximately 1 km (0.6 mi) (depending on cable) equivalent to
GL120 PCLINK (see SIZ-C825-70.)
Baud Rate
0.5M(*)/1M/2M/4Mbps
(*) 0.5Mbps is only allowed to be used in response to quotation for the
replacement of existing system. Use with new items is not allowed.