Yaskawa MP2000 Series - Manual (Page 12)

Page 12
TM.MP2000.02, 1/18/2011
Data subject to change without notice
Yaskawa America, Inc.
Á
Classification Display Content Description
RUN ERR LTX STX LRX SRX
Error (cont.)
Software Error
No. of Flashes During Error
1: –
2: Watchdog
Timeout
3: Address Error (Read)
Exception
4: Address Error (Write)
Exception
5: FPU Exception
6: General Illegal
Command Exception
7: Slot Illegal Command
Exception
8: General FPU Check
Exception
9: Slot FPU Check
Exception
Module processor error.
Module replacement is necessary.
During
Flash
Write
During Flash Clear
During Flash Write
This displays when flash clearing or flash write
are underway in cases where a flash writing tool
is mounted and power is turned ON.
Flash Write Normal Completion
This displays when the flash write has been
completed, normally in cases where a flash
writing tool has been mounted, and power turned
ON.
Flash Write Error
This displays when the flash write has been
completed, with an error in cases where a flash
writing tool has been mounted, and power turned
ON.
It is necessary to recycle power, perform writing
again and check the ROM.