Yaskawa Portable Control Display Unit - Manual (Page 66)

7 FORCING MENU
60 Forcing (FRC) Menu
01/22/96
(00200 or 00444) on the top line. The
current value of the forcing data is shown
on the bottom line.
• Press the ENT key to change the
data. The top line of the display will
flash.
Numeric values are entered via the numeric
keypad, while logical states are entered via
the INC or DEC key. The INC key will set
the state to “ON” and the DEC key will set
the state to “OFF”.
• Enter the new forcing value, or press
the INC or DEC key. The display
will change to:
OR
The operator at this point can press either
the ENT, CLR, or ESC key.
LOGO Block 00444
ON
NUMI Block 00200
100