Yaskawa Portable Control Display Unit - Manual (Page 14)

3 MONITOR MENU
8 Monitor (MON) Menu
01/22/96
MONITOR (MON)
MENU
The MON menu contains the values of
functions that can be viewed, but NOT
modified. Function codes # 600 through #
799 are reserved for display-only types of
values. Function codes for display-only
types of values are dependent on the
contents of the PAC Diagram for the
particular drive.
Example:
Assume the operator wishes to view the
armature voltage of the motor. For this
example the armature voltage has function
code # 610. The appropriate function can
be selected in one of two ways:
1. Scrolling
• Press the MON key followed by
enough INC or DEC key repetitions
until the desired item shows in the
PCDU display:
OR
2. Direct Access
• Enter the appropriate function code
from the top level of any menu
display. The display will change to:
Enter Function
Number : 610
ARM VOLTAGE
0.5V M610