Yaskawa Portable Control Display Unit - Manual (Page 62)

56 Forcing (FRC) Menu
01/22/96
The Password is provided at the time of
order entry to the customer’s cognizant
drives authority.
• Enter the password by using the
shift (SHF) key. The PCDU will
display the following message if the
password entered was invalid or it
was not entered correctly:
• Press the ESC key if the “INVALID
PASSWORD” message appears.
Start process again from the
following display:
If the password was entered correctly or if
there is no need for the password, the
PCDU will display:
• Press the F1 key if motor rotation is
not desired, or F2 if motor rotation is
acceptable. After F1 or F2 is
pressed, the PCDU displays:
F1 = Enter Block #
F2 = Reset F3 = List
F1 = No Rotation
F2 = Allow Rotation
Enter password :
INVALID PASSWORD
(Press ESC)
7 FORCING MENU