Yaskawa Portable Control Display Unit - Manual (Page 36)

6 TEST MENU
30 The Trace Monitor Function
01/22/96
Using the Trace
Monitor Function
Select the Trace Monitor Function in one
of two ways:
1. Scrolling
• Press the TST key. Then repeatedly
press the INC or DEC key until the
PCDU displays:
• Press the ENT key.
OR
2. Direct Access
• Enter function # 980 from the top
level of any menu. The display
changes to:
• Press the ENT key. The PCDU will
display:
• Press ENT to enter the Trace
Monitor.
Once the Trace Monitor Function has been
accessed, the PCDU will display:
F1 = Edit Trace
F2 = View Trace
TRACING MONITOR
(Press ENT) T980
Enter Function
Number : 980
TRACING MONITOR
(Press ENT) T980