Yaskawa Portable Control Display Unit - Manual (Page 48)

6 TEST MENU
42 Loading Defaults
01/22/96
1. Scrolling
• Press the TST key, then repeatedly
press the INC or DEC key until the
PCDU displays:
This display shows the description of
function # 995 on the top line. The bottom
line displays a prompt to press the ENT
key as well as the function number (995)
currently being used. The “T” preceding
“995” indicates that this function code is
part of the TEST menu.
• Press the ENT key.
OR
2. Direct Access
• Enter the appropriate function
number (995) from the top level of
any menu display. The display
changes to:
• Press the ENT key. The PCDU now
displays:
• Press the ENT key.
Once the Load Defaults function has been
accessed, the PCDU displays one of two
messages.
LOAD DEFAULTS
(Press ENT) T995
Enter Function
Number : 995
LOAD DEFAULTS
(Press ENT) T995