Yaskawa Portable Control Display Unit - Manual (Page 55)

6 TEST MENU
49 Diagnostics
01/22/96
Select the Power Conversion Unit
Parameter Measurement function in one of
two ways:
1. Scrolling
• Press the TST key, then repeatedly
press the INC or DEC key until the
PCDU displays:
This display shows the description of
function # 998 on the top line. The bottom
line displays a prompt to press the ENT
key as well as the function number (998)
currently being used. The “T” preceding
“998” indicates that this function code is
part of the TEST menu.
• Press the ENT key.
OR
2. Direct Access
• Enter the appropriate function
number (998) from the top level of
any menu display. The display
changes to:
• Press the ENT key. The PCDU
displays:
• Press the ENT key.
PCU Diagnostics
(Press ENT) T998
Enter Function
Number : 998
PCU Diagnostics
(Press ENT) T998