Yaskawa Portable Control Display Unit - Manual (Page 15)

3 MONITOR MENU
9 Monitor (MON) Menu
01/22/96
• Press the ENT key. The display will
show:
This display shows the function name on
the top line. The present value, units, and
the function code are shown on the bottom
line. The “M” before the function code
indicates that the item in the display is
from the MON menu. In order to view the
next or previous function in the MON
menu, the operator may press the INC or
DEC key. Note that there may be a
numerical gap in the function codes
depending on what the PAC diagram
contains. The PCDU will wrap around to
the first displayed function if the INC key
is pressed while the LAST function is
displayed.
ARM VOLTAGE
0.5V M610