Yaskawa Portable Control Display Unit - Manual (Page 23)

5 FAULT MENU
17 Displaying the Fault List
01/22/96
OR
2. Direct Access
• Enter the function number 0 from the
top level of any menu. The display
changes to:
• Press the ENT key. The PCDU now
displays:
• Press the ENT key.
Once the Fault List has been accessed by
selecting Function # 000, the PCDU has
the following possible displays:
If there are no faults currently in the Fault
List, the display will change to:
• Press ESC to return to the top level
display:
If faults are present in the Fault List , the
PCDU will display:
This informs the operator that he is viewing
the top of the Fault List, and that pressing
TOP OF FLT LIST
CLR clears all
DISPLAY FAULTS
(press ENT) F000
NO FAULTS
(Press ESC)
DISPLAY FAULTS
(press ENT) F000
Enter Function
Number : 000