Yaskawa SI-ES3 for V1000 - Manual (Page 6)

1 Preface and Safety
EN 6 YASKAWA Europe YEU TOEP C710606 98A - V1000 Option EtherCAT - Installation Manual
 Registered Trademarks
• EtherCAT ® is registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
• Other company names and product names listed in this manual are registered trademarks
of those companies.
 Supplemental Safety Information
Read and understand this manual before installing, operating, or servicing this option card.
The option card must be installed according to this manual and local codes.
The following conventions are used to indicate safety messages in this manual. Failure to
heed these messages could result in serious or possibly even fatal injury or damage to the
products or to related equipment and systems.
 General Safety
DANGER
Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation, which, if not avoided, could result in death or serious
injury.
CAUTION
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate
injury.
NOTICE
Indicates an equipment damage message.
General Precautions
• The diagrams in this section may include drives without covers or safety shields to illustrate details. Be sure to rein-
stall covers or shields before operating any devices. The option board should be used according to the instructions
described in this manual.
• Any illustrations, photographs, or examples used in this manual are provided as examples only and may not apply
to all products to which this manual is applicable.
• The products and specifications described in this manual or the content and presentation of the manual may be
changed without notice to improve the product and/or the manual.
• When ordering a new copy of the manual due to damage or loss, contact your YASKAWA representative or the
nearest YASKAWA sales office and provide the manual number shown on the front cover.