4 receiving, 4receiving, Contents and packaging – Yaskawa SI-ES3 for V1000 User Manual
Page 10: Tool requirements
EN 10
YASKAWA Europe YEU TOEP C710606 98A - V1000 Option EtherCAT - Installation Manual
4 Receiving
4
Receiving
Please perform the following tasks after receiving the EtherCAT
®
Option:
• Inspect the EtherCAT
®
Option for damage.
If the EtherCAT
®
Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the PCB.
• If you have received the wrong model or the EtherCAT
®
Option does not function
properly, contact your supplier.
Contents and Packaging
Table E.3 Option Package Contents
Tool Requirements
A Phillips screwdriver PH1(#1) or PH2(#2) is required to install the EtherCAT
®
option.
Note: Tools required to prepare EtherCAT
®
cables for wiring are not listed in this
manual.
Description:
Option Card
Ground Cable
Installation Manual
Quantity:
1
4
3
MANUAL