Yaskawa Varispeed-686SS5 CIMR-SSA - Manual (Page 15)

16
2 INSTALLATION
CAUTION
S Lift the cabinet by the base. When moving the unit, never lift by the front cover.
Otherwise, the main unit may be dropped causing damage to the unit.
S Mount the inverter on nonflammable material (i.e. metal).
Failure to observe this caution can result in a fire.
S When mounting units in an enclosure, install a fan or other cooling device to keep the in-
take air temperature below 45_C.
Overheating may cause a fire or damage to the unit.
This chapter describes the configuration, location and space when mounting the VS-686SS5.
2.1 REMOVING AND REPLACING THE DIGITAL OPERATOR
Remove and replace the digital operator as follows.
(1) Removing the Digital Operator
Digital Operator
1
2
Push the digital operator lever in the direction
shown by arrow 1 and lift the digital operator
in the direction shown by arrow 2 to remove
the digital operator from the front cover.
Front Cover
Fig. 2 Removing the Digital Operator