Yaskawa Varispeed-686SS5 CIMR-SSA - Manual (Page 13)

14
1 RECEIVING
CAUTION
S Do not install or operate any inverter which is damaged or has missing
parts.
Failure to observe this caution may result in personal injury or equipment damage.
This chapter describes how to verify the inverter after delivery to the user.
1.1 INSPECTION CHECKPOINTS
(1) Receiving Checkpoints
Table 1 Checkpoints
Checkpoints Description
Does the inverter model number correspond with
the purchase order?
Check the model number on the nameplate on the side of the
VS-686SS5.
Are any parts damaged?
Visually check the exterior and verify that there was no damage during
transport.
Ishardware properly seated and securely tightened?
Remove inverter front cover.
Check all visible hardware with appropriate tools.
Was an instruction manual received? VS-686SS5 instruction manual (No.: TOE-S686-15)
If any of the above checkpoints are not satisfactory, contact your YASKAWA representative.
(2) Checking the Nameplate Data
(a) Nameplate Data
Example of Japan domestic standard model CIMR-SSA2018 (200VAC 18.5kW)
Serial No.
Inverter Model
Input Spec.
Lot No.
Inverter Spec.
Output Spec.
Mass LOT NO : MASS : 28kg
YASKAWA ELECTRIC CORPORATION
AC 3PH 200 − 220 V 50Hz
200 − 230 V 60Hz
MODEL : CIMR − SSA2018 SPEC : 20180A
SER NO :
JAPAN
INPUT :
OUTPUT : AC 3PH 0 − 230 V 30kVA 80A