Yaskawa Modbus TCP/IP Installation - Manual (Page 8)

8 YASKAWA ELECTRIC TOBP C730600 57B 1000-Series Option SI-EM3 Installation Manual
2 Product Overview
2 Product Overview
◆
About This Product
This option provides a communications connection between the drive and a Modbus TCP/IP
network. The option connects the drive to a Modbus TCP/IP network and facilitates the
exchange of data.
This manual explains the handling, installation and specifications of this product.
The option is a communications link to connect industrial devices (such as smart motor
controllers, operator interfaces, and variable frequency drives) as well as control devices
(such as programmable controllers and computers) to a network. The option is a simple,
networking solution that reduces the cost and time to wire and install factory automation
devices, while providing interchangeability of like components from multiple vendors.
By installing the option to a drive, it is possible to do the following from a Modbus TCP/IP
master device:
• drive operation
• drive operation status monitoring
• changing parameter settings.
◆
Applicable Models
The option can be used with the drive models in Table 1 .
Table 1 Applicable Models
Drive Series
<1> See “PRG” on the drive nameplate for the software version number.
Drive Model Number Software Version <1>
A1000
CIMR-A†2A†††† ≥ 1010
CIMR-A†4A0002 to 4A0675 ≥ 1010
CIMR-A†4A0930 and 4A1200 301†
CIMR-A†5A†††† 504†
Z1000 CIMR-Z††A†††† ≥ 1014
Modbus_IM_E_conditional.fm 8 ページ ２０１２年１０月３１日 水曜日 午後１時４５分