Yaskawa Modbus TCP/IP Installation - Manual (Page 16)

5 Installation Procedure
16 YASKAWA ELECTRIC TOBP C730600 57B 1000-Series Option SI-EM3 Installation Manual
◆
Installing the Option to A1000 Drive
■ Prior to Installing the Option
Prior to installing the option, wire the drive, make necessary connections to the drive
terminals, and verify that the drive functions normally without the option installed. Refer to
the Quick Start Guide packaged with the drive for information on wiring and connecting the
drive.
Figure 2 shows an exploded view of the drive with the option and related components for
reference.
Figure 2
Figure 2 Drive Components with Option
A – Insertion point for CN5 connector H – Included screws
B – SI-EM3 option I – Ground wire
C – Drive front cover J – Option modular connector CN1
D – Digital operator K – Drive grounding terminal (FE)
E – LED label L – Connector CN5-A
F – Drive terminal cover M – Connector CN5-B
G – Removable tabs for wire routing N – Connector CN5-C
F
H
L
M
N
K
I
B C
D
E
A
G
J
NS MS
Modbus_IM_E_conditional.fm 16 ページ ２０１２年１１月５日 月曜日 午後４時３２分