Option compatibility with a1000 – Yaskawa Modbus TCP/IP Installation User Manual
Page 48
9 Troubleshooting
48
YASKAWA ELECTRIC TOBP C730600 57B 1000-Series Option SI-EM3 Installation Manual
◆
Option Compatibility with A1000
A limited number of options may be simultaneously connected to the A1000 depending on
the type of option. Refer to
for more information. More details can be found in the
Options and Peripheral Devices chapter of the drive Technical Manual.
Table 14 Option Installation Compatibility
Option
<1> When installed in CN5-A, the AI-A3 and DI-A3 options can be used to set the frequency reference or replace the
drive analog inputs with higher resolution. When installed in CN5-B or CN5-C, these options can only be used for
monitoring; their input levels will be displayed in U1-17 or U1-21 to U1-23.
<2> Use the CN5-C connector when connecting only one option to the drive; use both CN5-B and CN5-C when
connecting two options.
Connector
Number of Possible Options
SI-C3, SI-EM3, SI-EN3, SI-N3, SI-P3, SI-S3, SI-W3, etc.
CN5-A
1
PG-B3, PG-X3, etc.
CN5-B, C
, AO-A3, DI-A3
CN5-A, B, C
1
Modbus_IM_E_conditional.fm 48 ページ ２０１２年１０月３１日 水曜日 午後１時４５分