Yaskawa SI-EN3 Installation - Manual (Page 31)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual 31
7.
Replace and secure the front cover of the drive (D) and replace the HOA Keypad
(E).
Figure 14
Figure 16 Replace the Front Cover and HOA Keypad
Note: Take proper precautions when wiring the option so that the front covers will easily fit back onto
the drive. Make sure no cables are pinched between the front covers and the drive when
replacing the covers.
8.
Set drive parameters in Table 6 for proper option performance.
◆
EDS Files
For easy network implementation of drives equipped with the option, an EDS file can be
obtained from:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
Other areas: Contact a Yaskawa representative.
Note: Download the EDS file for SI-EN3 option. The SI-EN3 will not function as a slave in the
network without the appropriate EDS file.
D
E
A1000
EtherNet_IM_E_conditional.fm 31 ページ ２０１２年１１月５日 月曜日 午前１１時３９分