Yaskawa SI-EN3 Installation - Manual (Page 20)

5 Installation Procedure
20 YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual
3.
Make sure the screws on the left and right sides of the option terminal block (J) are
tightened with a tightening torque of 0.5 to 0.6 Nxm (4.4 to 5.3 in lbs), then insert the
option (B) into the CN5-A connector (L) located on the drive and fasten it using one
of the included screws (H).
Figure 5
Figure 5 Insert the Option
L
H
J
B
A1000
EtherNet_IM_E_conditional.fm 20 ページ ２０１２年１１月５日 月曜日 午前１１時３９分