Yaskawa SI-EN3 Installation - Manual (Page 28)

5 Installation Procedure
28 YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual
3.
Make sure the screws on the left and right sides of the option terminal block (H) are
tightened with a tightening torque of 0.5 to 0.6 Nxm (4.4 to 5.3 in lbs), then insert the
option (B) into the CN5 connector (J) located on the drive and fasten it using one of
the included screws (C).
Figure 12
Figure 13 Insert the Option
J
B
C
H
A1000
EtherNet_IM_E_conditional.fm 28 ページ ２０１２年１１月５日 月曜日 午前１１時３９分