SMA WB 5000A-11 Installation - Manual (Page 75)

SMA Solar Technology AG Decommissioning
Installation Manual WB5A_6A-IA-IEN114540 75
7. Remove the inverter from the wall mounting bracket
by lifting it vertically upwards.
8. To transport the inverter, use the side handles
(top and bottom) or a steel rod
(maximum diameter 30 mm). The rod must be
pushed through the enclosure openings.
☑ The inverter is disassembled.
10.2 Packing the Inverter
If possible, always pack the inverter in its original packaging. If the original package is no longer
available, use an equivalent box. The box must be completely closeable and suitable for the weight
and the size of the inverter.
10.3 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between
–25°C and +60°C.
10.4 Disposing of the Inverter
Dispose of the inverter at the end of its service life in accordance with the disposal regulations for
electronic waste which apply at the installation location at that time. Alternatively, send it back to
SMA Solar Technology AG with shipping paid by sender, and labeled "ZUR ENTSORGUNG"
("for disposal") (see Section 13 "Contact" (page 84)).