SMA WB 5000A-11 Installation - Manual (Page 35)

SMA Solar Technology AG Electrical Connection
Installation Manual WB5A_6A-IA-IEN114540 35
2. To seal the inverter, any unused DC inputs must be closed with DC connectors and sealing
plugs.
– For unused DC connectors, push down the
clamping bracket and slide the screw joint up to
the thread.
– Insert sealing plug into the DC connector.
– Fasten the DC connector (torque: 2 Nm).
– Insert the DC connectors with sealing plugs into
the corresponding DC inputs on the inverter.
☑ The DC connectors click audibly into position.
3. Ensure that all DC connectors are securely in place.
☑ The small wind turbine system is connected.
You can now commission the inverter as described
in Section 6 "Commissioning" (page 48).
The following connections are optional.
Sealing plugs
• Do NOT insert the sealing plugs DIRECTLY into the DC inputs on the inverter.
+
1
2
+
+