SMA WB 5000A-11 Installation - Manual (Page 20)

Mounting SMA Solar Technology AG
20 WB5A_6A-IA-IEN114540 Installation Manual
4. Screw the inverter onto the wall mounting bracket
on both sides using the screws (M6x8) provided.
Only fasten the screws hand-tight.
5. Check to ensure that the inverter is securely in place.
6. Close the recessed grips with the ventilation grids
provided. To help you identify the sides, the
ventilation grids are marked on the inside with
"links/left" and "rechts/right".
The ventilation grids prevent intrusion of dust and
insects, and can be reordered from
SMA Solar Technology AG as required
(see Section 12 "Accessories" (page 83)).
Optional anti-theft protection
To protect the inverter against theft, the back
panel can be secured to the wall at the bottom
using 2 safety screws.
The other 2 holes are spares.