SMA WB 5000A-11 Installation - Manual (Page 65)

SMA Solar Technology AG Troubleshooting
Installation Manual WB5A_6A-IA-IEN114540 65
9 Troubleshooting
If the inverter displays blink codes which differ from those described below, contact the
SMA Service Line.
In the user manual provided, you will also find a description of the display messages during operation,
status messages and measurement channels.
Do not try to carry out repairs other than those described here. Instead, use the
SMA Solar Technology AG 24-hour replacement service (the inverter will be ready for dispatch and
at the forwarding agency within 24 hours) and repair service.
9.1 Blink Codes
Green Red Yellow Status
flashing flashing flashing OK (startup phase)
permanently on off off OK (feed-in operation)
permanently on off ground fault or varistor
defective
permanently on OK (initialization)
flashing quickly
(3 x per second) off off OK (stop)
permanently on off ground fault or varistor
defective
flashing slowly
(1 x per second) off off OK
(waiting, grid monitoring)
goes off briefly
(approx. 1 x per second) permanently on off ground fault or varistor
defective
off off OK (derating)
off off off OK (night-time deactivation)
on / flashing Fault
permanently on off ground fault or varistor
defective
on / flashing ground fault or varistor
defective and disturbance