SMA WB 5000A-11 Installation - Manual (Page 17)

SMA Solar Technology AG Mounting
Installation Manual WB5A_6A-IA-IEN114540 17
• Observe minimum clearances as shown in the
diagram to walls, other inverters or objects, in order
to guarantee sufficient heat dissipation.
Multiple inverters installed in areas with high ambient temperatures
There must be sufficient clearance between the individual inverters to ensure that the
cooling air of the adjacent inverter is not drawn in.
If necessary, increase the spacing and make sure there is enough fresh-air supply to ensure
sufficient cooling of the inverters.
500 mm
300 mm
300 mm
50 mm
300 mm