SMA SMC 5000 Installation - Manual (Page 7)

SMA Technologie AG Introduction
Installation Guide SMC50_60-11:SE2006 Page 7
1 Introduction
This installation manual is intended solely for qualified electricians. Its aim is to help
install and set up SMA Sunny Mini Central 5000/6000 inverters quickly and
correctly.
For detailed information on troubleshooting and on how to use the Sunny Mini
Central 5000/6000, including information about the different communication
options, please see the operating instructions.
The „Sunny Design“ tool will help to dimension and check the size of your strings with
respect to the inverter you intend to use. Further information about „Sunny Design“
is available at www.SMA.dSunny Mini CentralSunny Mini Centrale.
If you require further information, please call the Sunny Mini Central hotline on the
following number:
+49 561 95 22 - 499
The installation of the Sunny Mini Central may only be done by
qualified technicians. The installer must be approved by the utility
company. Please read the installation guide carefully before you
begin with the installation. The installation of utility interactive
power sources must be compliant with all applicable regulations of
the utility company and with all applicable regulations and
standards.
The Sunny Mini Central 5000/6000 is equipped with the SMA grid guard. This
is a type of independent disconnection device. It ensures that the Sunny Mini
Central 5000/6000 complies with the VDEW (Verband der
Elektrizitätswirtschaft – German Electricity Industry Association) regulations for
the connection and parallel operation of electrical power units to the low-
voltage grid of the electricity supply company and with DIN VDE 0126 (4.99)
which is a part of these regulations.