SMA SMC 5000 Installation - Manual (Page 25)

SMA Technologie AG Installation
Installation Guide SMC50_60-11:SE2006 Page 25
5 Installation
5.1 Mounting
For trouble-free mounting of the Sunny Mini Central
5000/6000 we recommend to use the bracket for wall
installation included in delivery. You can mount it verti-
cally in firm concrete or stone walls with e. g. stainless
steel 8 mm x 50 mm hexagon screws according to DIN
571, an appertaining washer and with a 10 mm dowel.
Keep the weight of the Sunny Mini Central 5000/6000
(63 kg) in mind.
For installing your Sunny Mini Central 5000/6000 on
wooden wall studs, use the four holes in the middle of
the wall-mounting bracket. Position the wall-mounting
bracket against a stake of the wall. Make sure that the
wall you choose to mount the Sunny Mini Central
5000/6000 on is sturdy enough to support its weight
(63 kg) over a long period of time and that the wall is
vertical.
1. Mount the bracket. To mark the positions for drill
holes you can also use the bracket as a drilling
template.
2. Hang the upper fixing straps of the Sunny Mini
Central 5000/6000 into the bracket (2) so that it
cannot be shifted sideways any more.
3. Secure the Sunny Mini Central 5000/6000
against lifting off by screwing the M6x10 screw
(included in delivery) into the lower middle fixing
strap (3).
4. Ensure the Sunny Mini Central 5000/6000 has
been tightly fastened.
Betrie b Opera tion Erdschlu ss Earth Fault
Photovoltaik -Wechselrich ter Photovoltaic inve rter Störung Failure
Utility In teractiv e Inverter
2
3
1
1