SMA SMC 5000 Installation - Manual (Page 16)

Requirements for the Installation SMA Technologie AG
Page 16 SMC50_60-11:SE2006 Installation Guide
Important for the selection of the location:
Please make sure there is a sufficient space for heat dissipation! In a normal environ-
ment the following clearances should be provided for the Sunny Mini Central 5000/
6000:
If you decide to install the Sunny Mini Central 5000/6000 in an area with high am-
bient temperatures, you should enlarge the clearances. Otherwise the Sunny Mini
Central 5000/6000 could take air in from the devices next to it. Ensure sufficient ven-
tilation.
Unintended removal of the PV plug connectors can damage the
connectors and even result in serious injuries. Install the Sunny
Mini Central 5000/6000 at a place where an unintended removal
of the PV plug connectors (e. g. by children) is not possible.
Individual components in the Sunny Mini Central can reach a tem-
perature of more than 60 °C.
Do not install the Sunny Boy on flammable construction materials,
in areas where highly inflammable materials are stored or in po-
tentially explosive environments!
Minimum clearances
Lateral 30 cm
Top 30 cm
Bottom 30 cm
Front 5 cm
30
cm
30
cm
30 cm 30 cm
5
cm