SMA SC 200 Installation - Manual (Page 63)

SMA Solar Technology AG External Connections
Installation Guide SC20_25_35-IEN094521 63
1. Remove the front mounting plate with the DC fuse units.
2. Route the cable through the base opening into the DC cabinet.
3. Fit cable lugs to the cable.
4. Connect the cables to the DC fuses of the rear mounting plate.
5. Fit the strain relief of the DC cables. The cable clamps required are included. Secure the cable
clamps to the cable rail.
6. Reattach the front mounting plate.
☑ The cables are connected to the DC fuses of the rear mounting plate.
7. Route the cable through the opening into the DC cabinet.
8. Fit cable lugs to the cable.
9. Connect the cable to the DC fuses of the front mounting plate.
10. Fit the strain relief of the AC grid connection lines. Use the enclosed cable clamps to secure the
strain relief to the cable rail.
☑ The DC cables are now connected.