SMA GRID CONNECT BOX 12 - Manual (Page 8)

2 Safety SMA Solar Technology AG
8 GRID-BOX-12-3-20-BE-en-10 Operating Manual
I terms of interference immunity, the product is suitable for EMC environment A, and in terms of EMC emissions, it is
suitable for EMC environment B* .
Only operate the Grid Connect Box in conjunction with Multicluster Box.
The Grid Connect Box is designed for use at altitudes up to 3,000 m above mean sea level. If you wish to use the
Grid Connect Box at elevations above 3,000 m, contact the SMA Service Line (see Section 13, page 35).
The Grid Connect Box is designed for indoor use only. Only operate the product at temperatures between − 25°C and
+60°C.
All work on the product must only be performed using appropriate tools and in compliance with the ESD protection
regulations.
Suitable personal protective equipment is to be worn by all persons working on or with the product.
Use this product only in accordance with the information provided in the enclosed documentation and with the locally
applicable standards and directives. Any other application may cause personal injury or property damage. Alterations
to the product, e.g., modifications or conversions, are only permitted with the express written permission of
SMA Solar Technology AG. Unauthorized alterations will void guarantee and warranty claims and in most cases
terminate the operating license. SMA Solar Technology AG shall not be held liable for any damage caused by such
alterations.
Any use of the product other than that described in the Intended Use section does not qualify as appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a convenient place for future
reference and observe all instructions contained therein.
The type label must remain permanently attached to the product.
* in accordance with IEC 61439-1:2011