ShoreLand'r SLB60TAL - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0004303
Page 7 of 13 2/15/2011
Secure the tongue to the tongue plate on
e frame using two (2)1/2” X 3 9/16” X 5”
quare u bolts and four (4) 1/2” stainless
teel hex lock nut with nylon inserts.
ctuator/ Safety Chain:
ount the actuator onto the tongue (matching the hole pattern)
ainless steel hex bolts and three (3) 1/2” stainless steel hex lock nuts with nylon inserts.
ount the safety chains to the front of the tongue using a 1/2” X 1-1/2” stainless steel hex
olts, followed by a 1/2” stainless steel flat washer and safety chain. Secure the components
using a 1/2” stainless steel hex lock nut with nylon insert. Repeat
e
ct
tube coupling and tighten.
th
s
s
A
M
using three (3) 1/2” X 4 1/2”
st
M
b
on the inside of the tongue
the above instructions on the other side of the tongue.
Remove the 58" brake hose that is included in the brake kit box and attach to the rear of th
actuator. Route brake hose thru holes in the top of the tongue and insert grommets to prote
the brake line hose. Connect
line to the frame hose with a
Insert hose here
Tongue Harness Vehicle
onnections comes thru here c