ShoreLand'r SLB60TAL - Manual (Page 6)

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0004303
Page 6 of 13 2/15/2011
For rear axle 8200lb trailers:
Align the eye of the spring on the second
bogie holding the rear of the first axle.
support channel, spring bracket and then through the
spring bushing just placed above the hook spring
leaf. Secure u
axle with the hole provided in the rear of the rocker
om the outside in, insert a 9/16” x 3 3/4” hex bolt
spring. Secure with a 9/16” hex lock nut.
ird axle up into the spring bracket. Place a
spring bushing above the hook leaf of the spring
located inside the spring bracket channel. Secure the
spring in the spring bracket by placing a spring
support channel under the spring. Insert a 9/16” x 4-
3/4” hex bolt from the outside-in through the spring
Fr
sing a 9/16” lock nut. Repeat on the
ongue Assembly:
lide the tongue into the tongue
annel weldment on front
ossmember. Secure the tongue with
1/2” X 4 1/2” stainless steel hex bolt,
/2” stainless steel flat washer and 1/2”
ainless steel hex lock nut with nylon
sert.
through the rocker bogie and the eye of the
Raise the rear hook end of the springs on the th
other spring.
Tighten all axle U-bolts and spring bolts.
T
S
ch
cr
a
1
st
in
Spring Support
Channel