ShoreLand'r SLB60TAL - Manual (Page 2)

Special caution should be taken that while assembling these stainless steel
components to use Anti-seize compound on the threads to help prevent gauling.
Final Assembly Instructions
Remove the small parts from the frame by cutting the bands. Remove the bolt bag and sort all
nuts and bolts by size.
Refer to the following pages for assembly instruction by components.
Reference: Standing at the rear of the trailer will determine the right and left side of the trailer
in the assembly instructions.
The trailer side frames and crossmembers are assembled at the manufacturer. The spring
brackets and fenders are also assembled at the manufacturer.
Tools for Assembly
Wrenches: 9/16, 3/4, 7/8, & 1 1/8
Sockets: 9/16, 3/4, 13/16. & 1 1/8
Tools for connecting brakes:
Wrenches: 7/16, 3/8, 5/8, & 12mm and also a 3/8 nut driver
Safety Instructions
• Always wear personal protective equipment (safety glasses, gloves, etc) when
assembling and installing components.
• Inspect all fasteners regularly for deterioration and fastener tension. Refer to the
exploded part views for fastener locations in the appropriate parts manual.
• Replace any and all components that show deterioration due to wear or misuse before
using your boat trailer.
• Never modify parts and components. Always replace components with genuine
Shoreland’r replacement parts.
Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0004303
Page 2 of 13 2/15/2011