HEIDENHAIN TNC 640 (34059x-05) - Manual (Page 673)

Functions of the TNC 640 and the iTNC 530 compared 19.5
19
TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 1/2015
673
19.5 Functions of the TNC 640 and the
iTNC 530 compared
Comparison: Specifications
Function TNC 640 iTNC 530
Axes 18 maximum 18 maximum
Input resolution and display step :
Linear axes 0.1µm, 0.01 µm
with option 23 0.1 µm
Rotary axes 0.001°, 0.00001°
with option 23 0.0001°
Control loops for high-frequency spindles and torque/linear
motors With option 49 With option 49
Display 19-inch TFT color
flat-panel display or 19-inch TFT color
flat-panel display or
15.1-inch TFT color
flat-panel display
Memory media for NC, PLC programs and system files Hard disk or SSDR
solid state disk Hard disk or SSDR
solid state disk
Program memory for NC programs > 21 GB > 21 GB
Block processing time 0.5 ms 0.5 ms
HeROS operating system yes yes
Interpolation:
Straight line
Circle
Helix
Spline
5 axes
3 axes
yes
no
5 axes
3 axes
yes
Yes with option 9
Hardware modular in
electrical cabinet Modular in
electrical cabinet
Comparison: Data interfaces
Function TNC 640 iTNC 530
Gigabit Ethernet 1000BaseT X X
RS-232-C/V.24 serial interface X X
RS-422/V.11 serial interface - X
USB interface X X