Polaris 2010 Ranger XP - Manual (Page 47)

43
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 28
90
Brake fluid Ensure proper level 90
Front suspension Inspect, lubricate if necessary 67
Rear suspension Inspect, lubricate if necessary 67
Steering Ensure free operation 92
Tires Inspect condition and pressure 94
Wheels/fasteners Inspect, ensure fastener tightness 94
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 34
69
Coolant level Ensure proper level 80
81
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 88
Indicator lights/switches Ensure operation 26
Air filter, pre-filter Inspect, clean 85
Air box sediment tube Drain deposits whenever visible 85
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
96
Brake light/tail lamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
96
Seat Belts Check length of belt for damage,
check latches for proper operation
31