Polaris 2010 Ranger XP - Manual (Page 113)

109
MAINTENANCE
Removal from Storage
1. Check the battery electrolyte level and charge the battery if neces-
sary. Install it in the vehicle. Make sure the battery vent hose is
routed properly and that it's not pinched or restricted in any way.
2. Make sure the spark plug is tight.
3. Fill the fuel tank with fuel.
4. Check all the points listed in the Daily Pre-Ride Inspection section
on page 43. Tightness of the bolts, nuts and other fasteners should
be checked by an authorized Polaris dealer.
5. Lubricate at the intervals outlined in the Periodic Maintenance
Chart beginning on page 62.
Transporting the RANGER
Follow these procedures when transporting the vehicle.
1. Apply the brakes. Engage the park brake.
2. Stop the engine.
3. Place the transmission in gear.
4. Secure the fuel cap, oil cap and seat.
5. Always tie the frame of the RANGER to the transporting unit
securely with suitable straps or rope. Do not attach tie straps to the
front A-arm bolt pockets.
6. Remove the key to prevent loss during transporting.