Polaris 2010 Ranger XP - Manual (Page 50)

46
OPERATION
Driving Procedure
1. Wear a helmet and eye protection.
2. Perform the pre-ride inspection. See page 43.
3. Sit in the driver's seat and fasten the seat belt.
4. Start the engine and allow it to warm up.
5. Apply the service brakes and shift the transmission into gear.
6. Check your surroundings and determine your path of travel.
7. Release the park brake.
8. Keeping both hands on the steering wheel, slowly release the brakes
and depress the throttle with your right foot to begin driving.
9. Drive slowly. Practice maneuvering and using the throttle and
brakes on level surfaces.
10. Do not carry a passenger until you have at least two hours of driving
experience with this vehicle.