Features and controls, Console – Polaris 2010 Ranger XP User Manual
Page 29

25
FEATURES AND CONTROLS
Console
Mode Button
The yellow button located directly under the speedometer is used to tog-
gle through mode options available such as odometer, trip meter, hour
meter and tachometer. See page 35 for operation of the modes.
Gear Selector
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
Low gear is the primary driving range for the RANGER. High gear is
intended for use on hard-packed surfaces with light loads.
To shift gears, brake to a complete stop. When the engine is idling,
move the lever to the desired gear.
NOTICE: Shifting gears with the engine speed above idle or while the vehicle is
moving could cause transmission damage. Always shift when the
vehicle is stationary and the engine is at idle.
Tip: Maintaining shift linkage adjustment is important to assure proper transmis-
sion function. See your dealer if you experience any shifting problems.
- 2010 Ranger HD 2010 Ranger 6x6 2010 Ranger Crew 2010 Ranger 4x4 2010 Ranger EV 2011 Ranger EV 2011 Polaris EV 2011 Polaris LSV 2011 Ranger 4x4 500 EFI 2011 Ranger Crew 500 EFI 2011 Ranger 400 2010 Ranger 400 HO 2012 Ranger Diesel 2011 Ranger Diesel 2014 Ranger Diesel 2014 Ranger Crew Diesel 2011 Ranger XP 800 2011 Ranger 800 HD 2011 Ranger 800 6x6 2011 Ranger 800 Crew 2013 Ranger 500 Midsize 2013 Ranger Crew 500 2013 Ranger Diesel 2012 Ranger XP 800 2012 Ranger 800 HD 2012 Ranger 800 6x6 2012 Ranger 800 Crew 2013 Ranger 800 2013 Ranger 6x6 800 2013 Ranger Crew 800 2012 Polaris EV 2012 Polaris LSV