Polaris 2010 Ranger XP - Manual (Page 102)

98
MAINTENANCE
Fuses
If the engine stops or will not
start, or if you experience
other electrical failures, a
fuse may need replacement.
Locate and correct any short
circuits that may have caused
the blown fuse, then replace
the fuse. Spare fuses are pro-
vided in the fuse box.
If you suspect that a fuse or
relay may not be working
properly, please see your
Polaris dealer.
Tip: The 120 ohm resistor (if
equipped) is used by your
Polaris dealer for power
steering diagnostics.
Fuse Feature Supported
15A Accessories, 12V Power Receptacle
15A Electronic Fuel Injection
15A Engine Control Module
15A Lights
20A Main Fuse - Ignition, Instrument Cluster
30A Power Steering (if equipped)