Polaris 2001 ATV Universal ATV - Manual (Page 94)

83
RIDING
Crossing Streams
Your Polaris ATV can operate through water up to maximum
recommended depths reaching the footrests. Before fording
streams always:
1. Determine water depths and current.
2. Choose a crossing where both banks have gradual inclines.
3. Proceed slowly, avoiding rocks and obstacles if possible.
4. After crossing, dry the brakes by applying light pressure to the
lever until braking action is normal.
D Avoid operating the ATV through deep or fast flowing water.
If you cannot avoid water which exceeds the recommended
maximum depth, go slowly, balance your weight carefully,
avoid sudden movements, maintain a slow and steady for-
ward motion. Do not make sudden turns or stops and do not
make sudden throttle changes.
NOTE: After running the vehicle in water, it is critical your ma-
chine is serviced as outlined in the maintenance chart beginning
on page 99. The following areas need special attention: engine
oil, transmission oil, front and rear gearcases, and all grease
fittings.