Polaris 2001 ATV Universal ATV - Manual (Page 139)

128
MAINTENANCE
Choke Adjustment Procedure 4-cycle Engine s
Toggle Switch
1. Push choke knob to the full
off position.
2. Slide boot off in-line cable
adjuster sleeve. Loosen
adjustment locknut on in-
line cable adjuster.
3. Turn cable sleeve adjusting
nut clockwise on in-line ad-
juster until 1/8″ (.3 cm) or
more choke toggle free
play is evident.
4. Turn the cable sleeve adjusting nut counterclockwise on the in-
line cable adjuster until the toggle has zero free play. Then ro-
tate it clockwise until 1/8″ to 1/4″ (.3 to .6 cm) toggle free play
is evident.
5. Tighten adjustment locknut.
6. Slide boots back over cable adjuster sleeve until they touch at
the middle point of the sleeve.