Polaris 2001 ATV Universal ATV - Manual (Page 149)

138
MAINTENANCE
Oil Filter and Change (Cont.)
Xpedition 325
13. Shift machine into neutral and set parking brake.
14. Start the engine and let it idle for one to two minutes. Stop the
engine and inspect for leaks.
15. Re-check the oil level on the dipstick and add oil as necessary
to bring the level to the upper mark on the dipstick.
16. Dispose of used filter and oil properly.
NOTE: Drain Plug Torque: 14 ft. lbs. (19 Nm); Oil Filter Torque:
Turn by hand until filter gasket contacts the sealing surface, then
turn an additional 1/2 turn.