Polaris 2001 ATV Universal ATV - Manual (Page 85)

74
DAILY PRE-RIDE INSPECTION
Use the following checklist to verify your machine is in proper work-
ing order each time you ride.
Item/Inspection Procedure
1. Tires - check condition and pressures
2. Fuel and oil tanks - fill both tanks to their proper levels
3. All brakes - check operation, adjustment and fluid level (in-
cludes auxiliary brake)
4. Throttle - check for free operation and closing
5. Headlight/Taillight/Brakelight - check operation of all indicator
lights and switches
6. Engine stop switch - check for proper function
7. Wheels - check for tightness of wheel nuts and axle nuts; check
that axle nuts are secured by cotter pins
8. Drive chain - condition and slack; refer to drive chain adjust-
ment
9. Air cleaner element - check for dirt; clean or replace
10. Steering - check for free operation noting any unusual loose-
ness in any area
11. Loose parts - visually inspect vehicle for any damaged compo-
nents or loose nuts/bolts or fasteners
12. Operators helmet, goggles and clothing
13. Engine coolant - (Liquid Cooled Models Only) check for proper
level at the recovery bottle
You must inspect your ATV each time before riding to ensure
it is in proper working order. If proper inspection is not done,
severe injury or death could result.