Polaris 2001 ATV Universal ATV - Manual (Page 47)

36
CONTROL AND PARTS FUNCTIONS
Important Safeguards
D Always back slowly avoiding excessive speed and do not
use the reverse speed override switch system unless addi-
tional power is required for vehicle movement.
D Avoid turning at sharp angles in reverse.
D Avoid backing on steep inclines.
Light Switches and Indicator Lights
Switches
The light switch is located on the left hand handlebar. In addition
to turning the lights on and off, it also switches the lights from Hi
to Lo on models equipped with Hi-Lo beams. NOTE: Will not light
unless the main switch is on.
Backing your ATV can be dangerous!
You could hit an obstacle or person behind you; or the ve-
hicle could tip over rearward on a steep incline causing se-
vere injury or death.
This ATV is not equipped with highway approved lighting. This
ATV is designed for off-road use only and must not be ridden
on streets or highways. Use caution and drive at reduced
speeds in conditions of reduced visibility such as fog, rain and
darkness.