Polaris 2001 ATV Universal ATV - Manual (Page 131)

120
MAINTENANCE
Toe Alignment (cont.)
2. Place stands in front of the machine, perpendicular to the rear
tires.
3. Tie an elastic string around the stands, making sure string just
touches side surface of the rear tires on each side of machine
and goes around the stands in front of the machine.
4. Measure from string to rim at front and rear of front rim. Rear
rim measurement should be 1/16″ - 1/8″ (.2 to .3 cm) more than
front rim measurement.
5. If this measurement needs to be adjusted, contact your dealer
for service.