Grass Valley Thunder 80 v.1.0 User Manual
Page 59
43
Thunder
User Guide
Gain Setting: +30dB
Maximum Input Level: .................................... -6dBu, 20Hz to 20kHz
Input to Output Level Deviation: ................ +30dB ±.2dB @1kHz
Frequency Response: ...................................... +0/-.12dB, 20Hz to 100Hz;
±.015dB, 100Hz to 20kHz
Signal to Noise Ratio, ref. -6dBu: ................. ≥105dB unweighted, 20Hz to 20kHz;
≥110dB, A-weighting
Total Harmonic Distortion: ............................ ≤.003% @ 1kHz @ -10dBu;
≤.01%, 20Hz to 20kHz @ -10 dBu
Intermodulation Distortion: ......................... ≤.002% @ -10dBu, SMPTE-DIN Method
Common Mode Rejection Ratio:.................. ≥60dBu, 20Hz to 20kHz
Adjacent Channel Crosstalk, ref. +24dBu: ≥105dB, 20Hz to 20kHz
Gain Setting: +40dB
Maximum Input Level: .................................... -16dBu, 20Hz to 20kHz
Input to Output Level Deviation: ................ +40dB ±.3dB @1kHz
Frequency Response: ...................................... +0/-.12dB, 20Hz to 100Hz;
±.015dB, 100Hz to 20kHz
Signal to Noise Ratio, ref. -16dBu: ............... ≥108dB unweighted, 20Hz to 20kHz;
≥110dB, A-weighting
Total Harmonic Distortion: ............................ ≤.002% @ 1kHz @ -20dBu;
≤.005%, 20Hz to 20kHz @ -20 dBu
Intermodulation Distortion: .......................... ≤.001% @ -20dBu, SMPTE-DIN Method
Common Mode Rejection Ratio:.................. ≥80dBu, 20Hz to 20kHz
Adjacent Channel Crosstalk, ref. +24dBu: ≥105dB, 20Hz to 20kHz
Gain Setting: +50dB
Maximum Input Level: .................................... -26dBu, 20Hz to 20kHz
Input to Output Level Deviation: ................ +50dB ±.2dB @1kHz
Frequency Response: ...................................... +0/-.12dB, 20Hz to 100Hz;
±.015dB, 100Hz to 20kHz
Signal to Noise Ratio, ref. -26dBu: ............... ≥100dB unweighted, 20Hz to 20kHz;
≥102dB, A-weighting
Total Harmonic Distortion: ............................ ≤.004% @ 1kHz @ -30dBu;
≤.01%, 20Hz to 20kHz @ -30 dBu
Intermodulation Distortion: ......................... ≤.001% @ -30dBu, SMPTE-DIN Method
Common Mode Rejection Ratio:.................. ≥80dBu, 20Hz to 20kHz
Adjacent Channel Crosstalk, ref. +24dBu:. ≥100dB, 20Hz to 20kHz
Output Connector pin-out protocol: .............. Tascam® standard 8 channel balanced analog
audio, 25 pin DB-25 socket