Grass Valley Thunder 80 v.1.0 - Manual (Page 58)

42
Specifications
Mechanical/Environmental
Gain Setting: Unity
Maximum Input Level: ......................................... +24dBu, 20Hz to 20kHz
Input to Output Level Deviation: ................ ±.2dB @1kHz
Frequency Response: ...................................... +0/-.12dB, 20Hz to 100Hz;
±.015dB, 100Hz to 20kHz
Signal to Noise Ratio, ref. +24dBu: ............. ≥115dB unweighted, 20Hz to 20kHz;
≥120dB, A-weighting
Total Harmonic Distortion: ............................ ≤.005% @ 1kHz @ 20dBu;
≤.02%, 20Hz to 20kHz @ 20dBu
Intermodulation Distortion: ......................... ≤.002% @ 20dBu, SMPTE-DIN Method
Common Mode Rejection Ratio:.................. ≥40dBu, 20Hz to 20kHz
Adjacent Channel Crosstalk, ref. +24dBu: ≥110dB, 20Hz to 20kHz
Gain Setting: +10dB
Maximum Input Level: .................................... +14dBu, 20Hz to 20kHz
Input to Output Level Deviation: ................ +10dB ±.2dB @1kHz
Frequency Response: ...................................... +0/-.12dB, 20Hz to 100Hz;
±.015dB, 100Hz to 20kHz
Signal to Noise Ratio, ref.+14dBu: .............. ≥105dB unweighted, 20Hz to 20kHz;
≥110dB, A-weighting
Total Harmonic Distortion: ............................ ≤.006% @ 1kHz @ 10dBu;
≤.03%, 20Hz to 20kHz @ 10dBu
Intermodulation Distortion: ......................... ≤.005% @ 10dBu, SMPTE-DIN Method
Common Mode Rejection Ratio:.................. ≥40dBu, 20Hz to 20kHz
Adjacent Channel Crosstalk, ref. +24dBu: ≥105dB, 20Hz to 20kHz
Gain Setting: +20dB
Maximum Input Level: .................................... +4dBu, 20Hz to 20kHz
Input to Output Level Deviation: ................ +20dB ±.2dB @1kHz
Frequency Response: ...................................... +0/-.12dB, 20Hz to 100Hz;
±.015dB, 100Hz to 20kHz
Signal to Noise Ratio, ref. +4dBu: ................ ≥115dB unweighted, 20Hz to 20kHz;
≥118dB, A-weighting
Total Harmonic Distortion: ............................ ≤.002% @ 1kHz @ 0dBu;
≤.01%, 20Hz to 20kHz @ 0dBu
Intermodulation Distortion: ......................... ≤.001% @ 0dBu, SMPTE-DIN Method
Common Mode Rejection Ratio:.................. ≥60dBu, 20Hz to 20kHz
Adjacent Channel Crosstalk, ref.+24dBu: . ≥110dB, 20Hz to 20kHz