Grass Valley PVS 3000 July 2004 - Manual (Page 44)

Select an RS-422 control protocol
44 PVS 3000 & PVS3500 Installation Guide 23 February 2004
4. Select a serial port using the port select drop-down list as shown. COM1 and COM2
are RS-232 ports on the PVS3000 rear panel. P1 through P8 are RS-422 ports on the
I/O Panel.
Figure 1. dialog box
5. Click OK in the Channel Configuration dialog box.
6. Repeat step 2 through step 5 for the remaining panels.
7. Test the system using your automation controller.
This completes all the procedures in this Installation Guide. Refer to the Profile XP
System Guide for more information on customizing settings for your application.