Grass Valley PVS 3000 July 2004 - Manual (Page 38)

Select audio I/O format
38 PVS 3000 & PVS3500 Installation Guide 23 February 2004
c. Click the right-hand drop-down list arrow in the Embedded column for the
channel pair you want to configure, and select an audio group and channel pair
as shown.
NOTE: Up to two audio groups (8 audio channels) can be embedded on a single
video output. Embedded audio can only be allocated by groups of 4 channels. In
some cases, with two audio boards installed, you may have to select embedded audio
outputs first, then select the audio inputs for each audio board to be able to select
all the desired embedded outputs.
4. Click Finish to save your settings.
5. Continue with the next procedure in this guide to test your system setup.