Grass Valley PVS 3000 July 2004 - Manual (Page 36)

Select audio I/O format
36 PVS 3000 & PVS3500 Installation Guide 23 February 2004
3. If you selected embedded audio format, perform the following steps for each audio
channel input pair requiring embedded audio:
a. Click the left-hand drop-down list arrow in the Embedded column for the
channel pair you want to configure, and select a video input as shown.
NOTE: With one audio board, only the first 4 video inputs are selectable.
b. Click the right-hand drop-down list arrow in the Embedded column for the
channel pair you want to configure, and select an audio group and channel pair
as shown.
NOTE: Up to two audio groups (8 audio channels) can be extracted from a single
video input.